As an avid DIY enthusiast, you probably know how frustrating it can be to struggle with ill-fitting window shades. I’m excited to share this knowledge about the Redi Shade Easy Lift Trim-at-Home Shades. With these shades, trimming them to the perfect fit for your windows is a breeze. Here is a step-by-step guide to enjoying beautifully fitted shades without hassle. Let’s get started!

Effortlessly Trim Your Easy Lift Shades with Redi Shade: A Step-by-Step Guide

Introduction

Getting your window treatments right can make or break the overall aesthetic of your home. Easy Lift Shades is one of the most popular shades available in the market. They are highly effective and versatile and can give your home a clean, modern look.

However, they may not fit your window measurements right out of the box. No need to worry – Redi Shade has created a comprehensive guide to trimming Easy Lift Shades. I am excited to share a step-by-step guide that will make trimming your Easy Lift Shades easy and stress-free.

Step 1: Gather your tools

Before you begin to trim your Easy Lift Shades, you will need a few tools. These include a sharp kitchen knife, a measuring tape, and the trimming guide included in the package.

Step 2: Remove the end caps

To begin trimming your Easy Lift Shade, you must remove the end caps from both sides of the shade. You can do this by gently sliding them out of their slots.

Step 3: Place the trimming guide

Unroll your shade and place the trimming guide on the bottom rail of the shade. The trimming guide will dictate where you should cut the shade.

Step 4: Cut at your window width

Using your kitchen knife, cut along the line on the trimming guide that corresponds with your window width. Make sure to apply plenty of pressure when cutting the shade.

Step 5: Rocking motion

If necessary, use a rocking motion at the end to cut through the bottom rail of the shade. This will ensure a clean, straight cut.

Step 6: Put the end caps back on

Once you have finished trimming your Easy Lift Shade, put the end caps back on both sides of the shade. This will keep your shade securely in place.

Step 7: Test your shade

Before you mount your newly trimmed shade, make sure to test it for proper fit. Check that the shade fits snugly against the window frame and opens and closes smoothly.

Conclusion

Trimming your Easy Lift Shade may seem daunting at first, but it can be done quickly and easily with the right tools and a little patience. Follow these seven simple steps, and you’ll have a perfectly fitted shade in no time.

FAQs

Q1. Can I use scissors instead of a kitchen knife to trim my Easy Lift Shade?
A. We recommend using a sharp kitchen knife for the best results. Scissors may not give you a clean, straight cut.

Q2. What if I accidentally cut the shade too short?
A. Unfortunately, once the shade has been cut, it is impossible to add it back. We recommend double-checking your measurements before cutting.

Q3. What if my shade is slightly too wide for my window frame?
A. You can trim the shade using the steps described in this article, but only trim a little until it fits your window perfectly.

Q4. Can I adjust the length of my Easy Lift Shade?
A. Yes, you can adjust the shade length by following the same steps described in this article. However, remember that you will need to remove the shade from the window frame to make the necessary adjustments.

Q5. Can I reuse the trimming guide for multiple shades?
A. Yes, you can reuse the trimming guide for multiple shades if they are the same size.