Welcome to our step-by-step guide on how to install Redi Shade Easy Lift Shades! Enjoy this comprehensive guide to help you easily install your Redi Shades. Read this foolproof guide that guarantees a successful installation. So, let’s get started and transform your space with these sleek and stylish shades!

Effortless DIY: Your Ultimate Guide to Installing Redi Shade Easy Lift Shades in a Few Simple Steps

If you’re looking for an easy and inexpensive way to add privacy and light control to your home, consider installing Redi Shade Easy Lift Shades yourself! With a few simple tools and patience, you can achieve a professional-looking installation that will last years. This article will guide you through the installation process step-by-step, making it easy to measure, trim, and install your new shades.

Introduction

Redi Shade, Easy Lift Shades, is an excellent choice for those who want to add style and function to their windows without breaking the bank. These shades come in various colors and sizes and are made from high-quality, durable materials. They are also cordless, making them safer for pets and children.

If you’re ready to start, grab your measuring tape, a sharp kitchen knife, and the included trimming guide, and let’s go!

How to Measure Your Windows

Before installing your new shades, you need to measure your windows to determine what size to cut them down to.

1. Start by measuring the width of your window at three different points: the top, the middle, and the bottom.
2. Write down all three measurements and then choose the smallest number to use as the width of your shade.
3. Next, measure the length of your window from the top to the bottom and add 1 inch to this measurement. This extra inch will allow you to install the shade without being too tight or loose.

How to Trim Your Shade

Once you’ve measured your window, it’s time to trim your shade to the correct size. Follow these steps to do so:

1. Remove one of the end caps from your shade.
2. Place the included trimming guide on the shade and line it up with your chosen measurement.
3. Using a sharp kitchen knife, trim the shade along the guide. Use a rocking motion and constant pressure to ensure a clean cut.
4. Repeat this process on the other side of the shade.
5. Once you’ve trimmed the shade to the correct size, replace the end caps and discard any excess material.

How to Install Your Shade

Now that your shade is the right size, it’s time to install it in your window. Follow these steps to do so:

1. Remove the adhesive liner from your shade and position it in your window. Make sure it’s level and centered.
2. Please apply pressure for at least 15 seconds to ensure the adhesive is adequately bonded to the surface.
3. Wait 30 minutes before operating the shade to allow the adhesive to cure completely.
4. Once the adhesive has cured, simply pull the shade down and up as desired.

Benefits of Redi Shade Easy Lift Shades

There are many benefits to installing Redi Shade Easy Lift Shades in your home. They offer light control and privacy without cords, providing a safer environment for your family and pets. They can also be easily trimmed at home, allowing for a customized fit that looks professional and elegant.

Conclusion

If you’re looking for an easy and budget-friendly way to add privacy and light control to your home, consider installing Redi Shade Easy Lift Shades yourself. With just a few simple tools and patience, you can achieve a professional-looking installation that will last years.

FAQs after the Conclusion:

1. How do I know I measured my window correctly?
You should measure the width of your window at three different points: the top, the middle, and the bottom. Write down all three measurements and choose the smallest number to use as the width of your shade.

2. How do I trim the Redi Easy Lift Shade?
You can use a sharp kitchen knife to trim the Redi Shade Easy Lift Shade.

3. Can I install the Redi Shade Easy Lift Shade by myself?
Since it has an adhesive liner, you can install the Redi Shade yourself.

4. Should I wait before operating Redi Shade Easy Lift Shade?
You must wait 30 minutes before operating the Redi Shade, allowing the adhesive to cure completely.

5. Are the Redi Shade Easy Lift Shades cordless?
Yes, the Redi Easy Lift Shades are always cordless, making them safe for a home with children and pets.